6136HI550

6136HI550

  • 6136HI550
  • 300-410 kW (400-550 hp) @ 2100 rpm
  • Continuous, Heavy Duty, Intermittent

Specifications

Emissions Certifications

EPA Final Tier 4 
EU Stage V 

General engine data

Model6136HI550
Number of cylinders6
Displacement-- L (cu in)13.55 (827)
Bore and Stroke-- mm (in)132 x 165 (5.2 x 6.5)
Compression Ratio15.9:1
Engine TypeIn-line, 4-cycle
AspirationTurbocharged and air-to-air aftercooled
Length - mm (in)1446.23 (56.9)* *Engine length without fan drive
Width-- mm (in)890 (35)
Height-- mm (in)1366 (53.8)
Weight, dry - kg (lb)1468 (3237) Single Turbo

ATD

DOC/DPF/SCRSize 6

Performance data range

Rated power300-410 kW (400-550 hp) @ 2100 rpm
Peak power324-415 (434-556) @ 1900-2000 rpm
Application ratingContinuous, Heavy Duty, Intermittent
Peak torque1986-2510 nM (1465-1851 lb-ft) @ 1550 rpm
Power bulgeup to 8%
Torque riseup to 45%

Features

  • John Deere has billions of hours of field experience with off-highway diesel engine technologies and launched many of its engines ahead of EPA and EU deadlines, and is ready to meet Stage V emissions regulations using our proven diesel particulate filter (DPF) solutions. In most cases, OEM customers currently using a John Deere engine with a diesel particulate filter (DPF) won’t have to re-engineer machine design to meet the requirements of Stage V regulations. Our engineers continue to employ a global network of technical resources and the latest technology to lower emissions while improving performance and fluid efficiency.

  • Wastegated turbochargers are designed to develop more airflow at lower engine speeds to improve low-speed torque. The wastegate control device bleeds off a portion of the exhaust flow at higher engine speeds. Wastegated turbos deliver improved transient response and higher peak torque without compromising engine envelope size. They also provide the lowest installed cost across a given power range.

  • These engines utilize a catalyzed exhaust filter that contains a diesel oxidation catalyst (DOC) and a diesel particulate filter (DPF). The DOC reacts with exhaust gases to reduce carbon monoxide, hydrocarbons, and some particulate matter (PM). The downstream DPF traps and holds the remaining PM. Trapped particles are oxidized within the DPF through a continuous cleaning process called passive regeneration. Passive regeneration occurs during normal operating conditions when heat from the exhaust stream, and catalysts within the exhaust filter, trigger the oxidation of the trapped PM. If passive regeneration cannot be achieved due to low temperature, load, or speed, then PM is removed using active regeneration — an automatic cleaning process controlled by the exhaust temperature management system.

  • EGR cools and mixes measured amounts of cooled exhaust gas with incoming fresh air to lower peak combustion temperatures, thereby reducing Nox.

  • John Deere engines feature an SCR system that utilizes a urea-based additive, sometimes referred to as diesel exhaust fluid (DEF) to meet Stage V emission standards. A chemical reaction in the SCR catalyst converts urea and NOx emissions into nitrogen and water vapor.

  • The HPCR fuel system provides variable common-rail pressure and high injection pressures. It also controls fuel injection timing and provides precise control for the start, duration, and end of injection.

  • This is the most efficient method of cooling intake air to help reduce engine emissions while maintaining low-speed torque, transient response time, and peak torque. It enables an engine to meet emissions regulations with better fuel economy and the lowest installed costs.

  • The 4-valve cylinder head provides excellent airflow resulting in excellent low-speed torque and transient response.

  • Lower installed cost

  • Faster engine control unit (ECU) manages both the engine and the exhaust filter

  • Replaceable (wet) cylinder liners

  • Engine-mounted fuel filter